fbpx

How to Clean Snowmobile Helmet Shield: Important Dos & Don’Ts

How to clean snowmobile helmet shield important dos & don'ts

Are you gearing up for your next winter adventure? It’s winter again and that means it’s time to take out the snowmobiles! But before you hit the slopes, you’ll want to make sure your snowmobile helmet shield is clean and clear. So buckle up, because here are the important dos and don’ts for cleaning your snowmobile helmet shield – no more snowy smears on your face!

From the best cleaning products to use, to the steps you need to take for a thorough cleaning, we’ll cover it all. Let’s get started and learn how to clean a snowmobile helmet shield properly.

Initial Thoughts

Initial Thoughts 1

Snowmobiling is a great way to enjoy the outdoors, but there is one thing you don’t want to forget when you take your snowmobile for a spin- cleaning your helmet shield!

Just like the windshield on your car, your snowmobile helmet shield can get dirty and covered in snow and ice. Not only will this impair your vision, but it can also be dangerous if you’re not able to see clearly when you’re out on the slopes.

Whether you’re a snowmobiling novice or a seasoned veteran, it’s crucial to take the time to make sure your helmet shield is clean and ready for the adventure. But how do you do that? What are the important dos and don’ts when it comes to cleaning snowmobile helmet shields?

Well, follow these dos and don’ts for cleaning your snowmobile helmet shield and you’ll be ready to hit the slopes in no time!

Preparing Your Snowmobile Helmet Shield for Cleaning

Preparing Your Snowmobile Helmet Shield for Cleaning

Of course, there are certain things you need to do to get your snowmobile helmet shield ready for the cleaning process. You will need to:

  • Make sure your snowmobile shield is clean and dry.
  • Add a few drops of mild dish soap to a bowl of warm water.
  • Then gently wash the shield with a soft cloth, using circular motions.
  • After that, rinse the shield with warm water, then let it air dry.

What Products to Use (And Not to Use)

What Products to Use (And Not to Use)

It goes without saying that snowmobiling is an awesome way to get out and explore the great outdoors, but it’s important to keep your helmet shield clean and scratch-free to make sure you have the best visibility while you’re out there. And while you don’t want to make a snowmobile-sized mess while trying to clean it, you’ll need to know how to get the job done right. Here are a few things to remember when cleaning your snowmobile helmet shield:

First and foremost, never use harsh chemicals or abrasives to clean your shield. This can damage the surface and make it difficult to see through.

Instead, use mild dish soap and water. Be sure to rinse off all the suds completely, and then dry the shield with a soft fabric or a soft wet cloth.

Also, avoid using any household cleaners or solvents on your shield. These can cause damage and may even be toxic.

Do not use paper-based products such as paper towels. This is because they can scratch the helmet shield since they are particularly tough.

Wiping your shield in multiple directions can cause swirl markings after cleaning, making it even hard to see through the snowmobile helmet visor and other face shields. So try to avoid it.

Different Techniques for Polishing and Removing Smudges

Different Techniques for Polishing and Removing Smudges

Now it’s time to talk about polishing and removing smudges from your snowmobile helmet shield. Below are a few techniques you can try for a clean snowmobile helmet shield:

Try using a dry microfiber cloth or a soft-bristled toothbrush for cleaning smudges and dust off your helmet shield. Just make sure it’s not too abrasive because it could scratch the surface of the shield. And you don’t want that.

If case there’re more stubborn smudges, you could try using an anti-fog cleaner formulated just for snowmobiling helmets. Be sure to read the instructions before applying the cleaner, as some might require that you leave it on for a certain amount of time before wiping it off.

For polishing, you can use a clean microfiber cloth and some wax polish formulated specifically for plastic shields alongside warm soapy water. In this case, be sure to use small circular motions when applying and polishing away until the smudges are gone.

Storing and Maintaining Your Snowmobile Helmet’s Shield

Storing and Maintaining Your Snowmobile Helmet’s Shield

Well, it is important to take care of your shield to prolong its life. After use, make sure that you gently wipe down the outside of the snowmobile shield with a soft, damp cloth, and then use a soft brush to remove all dirt and debris. You can also use mild dish soap diluted in water.

However, be sure not to use any abrasive material or chemical products that could cause scratching or damage to the anti-fog coating on the inside of your shield.

Now, to properly store your helmet’s shield, it’s best to place it in the upright position on a flat surface, away from direct sunlight or any other sources that could cause heat damage. If your helmet does not have an anti-fog layer, you can sprinkle talcum powder on the inside of the shield before storing it so that it does not stick together when it gets wet from condensation. This will help keep your snowmobile helmet’s shield in good working form for a longer period.

Taking Care Of Your Snowmobile Helmet Shield

Taking Care Of Your Snowmobile Helmet Shield

Of course, one good approach to maintaining the appearance and performance of your shield is by knowing how to properly clean it, but this is not the only thing you should be doing. Here are some additional suggestions for keeping your snowmobile helmet shield in good shape:

Regular Cleaning

Regular cleaning is the key to a clean snowmobile helmet shield. You don’t have to wait until it’s completely covered and unusable to get it fixed. Regular cleaning will keep your windshield looking good for longer. So try to make it a habit of getting the vehicle cleaned after each ride, even if it’s not particularly dirty.

Park Your Snowmobile In The Shade

This is how you get to take care of other components including the snowmobile helmet visor. When not in use, keep your snowmobile together with its accessories out of direct sunlight, preferably in a garage or shed. If you don’t have space in the garage, find a shaded area or cover the vulnerable components with a tarp.

Why Do Snowmobile Helmets Foge Up

When you are riding a snowmobile in cold weather, you want to make sure that you can see as clearly as possible. In fact, fogged helmets are the leading cause of snowmobile accidents.

The major problem is actually too much moisture within and around your head. When moisture condenses, it creates water droplets that end up clinging to the visor and thereby blocking your vision.

This mostly occurs when you ride so hard resulting in preparation, or when the helmet doesn’t actually have enough vents for the excess heat to escape.

But How Can You Prevent Your Snowmobile Helmet From Fogging?

But how can you prevent your snowmobile helmet from fogging

First things first, make sure your helmet fits properly. This is the very first step to assuring your safety and preventing fog as well. Choose a helmet that fits you, preferably with the assistance of a specialist.

Allow for airflow; good-quality snowmobile helmets generally contain vents that serve to reduce heat and moisture buildup. You can open a vent or more if you are experiencing fog problems.

It’s also important to get a snowmobile helmet designed with breath deflection. Many helmets have this feature built in to keep warm breath from getting on the visor. So, you’ll be wise to choose one that comes with the breath deflector in place to help prevent fog.

You can also try wearing a balaclava or anti-fog mask. Chances are you already have one to help keep warm during those chilly days, so why not acquire one that also blocks out fog? Besides, you can wear a variety of masks and balaclavas with your helmet and still be fine.

Lastly, you may want to think about getting a heated face shield. More expensive helmets may come with heated helmet shields and visors to reduce fogging. If you ride frequently, it would be worthwhile to spend a little more money on one of these high-end options.

Conclusion

Conclusion

When it comes to snowmobiling, the last thing you want is your snowmobile helmet shield fogging up while on the slopes. It can be a bit of a nuisance and can keep you from enjoying the Winterland to the best of your abilities. Not to mention that it can pose a serious safety risk.

As such, you need to take precautions regarding the functionality of your eyewear, and this definitely includes having a clean snowmobile helmet shield. Fortunately, with the above tips, you can now ride without any fog issues. You might have to experiment with more of these approaches, but one of them will surely work and improve your ability to see clearly.

Sharing is caring!

Lisa Hayden-Matthews

Lisa Hayden-Matthews

An avid Skier, bike rider, triathlon enthusiast, amateurish beach volleyball player and nature lover who has never lost a dare! I manage the overall Editorial section for the magazine here and occasionally chip in with my own nature photographs, when required.

Related Posts

Subscribe To Our NewsLetter!

0
Would love your thoughts, please comment.x
()
x